EasyManua.ls Logo

Yeastar Technology NeoGate TG800 - IAX Protocol Configuration; General VoIP Preferences

Yeastar Technology NeoGate TG800
62 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NeoGate TG Series User Manual
52/62
Session -timers
Enable session-timer mode, default: yes. If you
found the call is cut off every 15 minutes every
time, please disable this.
Session-expires
The max refresh interval
·Session-minse
The min refresh interval, which mustn't be
shorter than 90s
Session-refresher Choose session-refresher, the default is Uas
7.2.4 IAX Settings
IAX is the Internal Asterisk Exchange protocol, you can connect to NeoGate TG
or register IAX trunk to another IAX server. Its supported by the asterisk-based
IPPBX.
Figure 7-26
Description
Bind Port Port used for IAX2 registrations. Default is 4569.
Bandwidth
Low/medium/high with this option you can control
which codec to be used.
Min Registration Time
Minimum duration (in seconds) of an IAX2 registration.
Default is 60 seconds
Max Registration Time
Maximum duration (in seconds) of an IAX2
registration. Default is 1200 seconds.
Enable the codec you want for IAX communication.
7.2.5 General Preferences

Other manuals for Yeastar Technology NeoGate TG800

Related product manuals