Need help?Do you have a question about the Yeti SB120 and is the answer not in the manual?
General| Intended Use | Trail |
|---|---|
| Wheel Size | 29" |
| Front Travel | 130mm |
| Rear Travel | 120mm |
| Head Tube Angle | 66.5° |
| Suspension | Full Suspension |
| Frame Material | Carbon |
| Category | Mountain |
Patented translating pivot for efficient pedaling and ideal suspension characteristics.
Hand-laid carbon fiber for stiffness and efficiency in framesets.
Enhances bearing life by ensuring perfectly aligned pivot connections.
2-bolt mounts for extra drivetrain security in demanding sections.
Secures cables for a quiet ride and clean aesthetic.
Hassle-free cable routing for a quieter, cleaner bike.
41mm/52mm integrated design increases stiffness and lowers ride height.
Protects frame and reduces chain slap noise.
Boost dropouts with SRAM UDH for strength and easy installation.
Suspension tunes developed to optimize SB120 kinematics.
Detailed measurements for frame geometry across different sizes.
Recommendations for rider height and corresponding frame sizes.
Lists key standards like travel, wheel size, bottom bracket, and headset.
Recommended service intervals for keeping your bike in top condition.
Essential torque values for frame assembly and maintenance.
Installation of shock, bolts, cable ports, protector, and link assembly.
Installing extenders, shock assembly, rear triangle, and pivots.
Checking rear triangle motion and link contact with seat tube.
Installing shock, housing clamps, and universal hanger.
Pressing bearings into the link assembly using a specific arbor.
Pressing bearings into the extender using correct orientation.
Steps for removing dust caps, bearings, and axle sleeve.
Steps for installing new bearings and axle sleeve.
Procedure for removing drive side bearing and axle sleeve.
Procedure for installing non-drive side bearing and axle sleeve.
Instructions for routing seatpost housing through the frame.
Detailed steps for cleaning, greasing, and reassembling the link.
Diagram identifying key components of the Switch Infinity system.
Table detailing minimum insertion depths for cabled droppers.
Table detailing maximum insertion depths for wireless droppers.
Key for understanding preparation methods like Loctite and Grease.
List of parts for the SB120 front triangle assembly.
List of parts for the SB120 swingarm assembly.
Detailed list of small components and hardware.
List of parts specific to the SB120 shock sub assembly.
Components for rebuilding link and shock extender bearings.
Parts for servicing the Switch Infinity V2 mechanism.
Parts included in the cable port kit.
Components for the nylon downtube protector.
Parts for various SB120 frame protectors.
Parts included in the shock extender kit.
List of hardware components for various rebuilds.
Parts for converting the bike to AXS compatibility.
Components for the Fox Linear Bearing V2 upgrade.
Options for gloss and matte frame protector sheets.
Kit for frame cable port plugs.
Explains the distinctions between Yeti's Turq and Carbon series frames.
Details on how the Switch Infinity technology operates.
Information on the required maintenance for the Switch Infinity system.
Guidelines on replacing or modifying Yeti frame parts.
Advice on upgrading or changing bike components.
Information regarding the use of anglesets on the SB120 frame.
Guidance on the appropriate fork travel for the SB120.
Information on the largest tire size that fits the SB120.
Details on fitting a water bottle inside the front triangle.
Information on compatible cranksets and bottom bracket standards.
Details on the specific rear wheel axle required for the SB120.
Information on the integrated headset type used on the SB120.
Information on maximum rear rotor size with and without adapters.
Confirmation of stealth routing for seatpost droppers.
The designed chainline for the SB120, around 55mm Boost.
Guidance on the maximum size of single chainrings that fit.
Confirmation of integrated 2-bolt ISCG '05 mounts.
Information on the type of rear shock the SB120 uses.
Details on the M8x36mm hardware and custom reducer for the shock.
Explanation why coil shocks cannot be used on the SB120.
Guidance on setting sag for optimal pedaling and terrain compliance.
The required seat post diameter for the SB120.
The required seat collar diameter for the SB120.
Details about the SB120's lifetime manufacturer's warranty.
Information on the longest travel dropper post that can be fitted.
Discussion on converting the bike to a mullet setup.
Information on frame and finish coverage, registration, and exclusions.
Policy for crash damage or non-warranty situations.
Legal disclaimer regarding damages and frame repair/replacement.
Yeti Cycles contact information and business hours.
To Next Page
