Need help?Do you have a question about the Yeti SB160 and is the answer not in the manual?
General| Frame Material | Carbon Fiber |
|---|---|
| Rear Travel | 160mm |
| Suspension | Full Suspension |
| Wheel Size | 29" |
| Category | Mountain |
| Brakes | SRAM or Shimano (various build options) |
Patented translating pivot for efficient pedaling and supportive suspension.
High modulus carbon fiber, floating collet axles, and integrated tapered head tube.
ISCG mounts, rattle-free cable ports, internal routing, frame guards, and integrated axle system.
Suspension tuned for optimal performance with the SB160 kinematics.
Detailed measurements for frame dimensions across different sizes.
Recommendations for rider height and corresponding frame sizes.
Key technical details including travel, wheel size, shock, and bottom bracket.
Recommended service intervals for keeping the bike in optimal condition.
Crucial torque values for various bolts and components during assembly.
Installing rear shock eyelet spacer and front triangle bolts.
Attaching cable port clamps and covers behind the head tube.
Securing downtube protector and assembling the Switch Infinity Link.
Installing race extenders and assembling shock extenders to the link.
Securing rear triangle and swingarm pivots.
Installing collet wedge bolts and mounting the shock.
Securing shock eyelet and installing drive-side housing clamp.
Installing non-drive housing clamp and universal derailleur hanger.
Instructions for pressing bearings into the link assembly using specific tools.
Instructions for pressing bearings into the extender components.
Step-by-step guide to remove bearings from the Switch Infinity V2 mechanism.
Step-by-step guide to install bearings into the Switch Infinity V2 mechanism.
Step-by-step guide to remove bearings from the Switch Infinity V1 mechanism.
Step-by-step guide to install bearings into the Switch Infinity V1 mechanism.
Guide for routing the seat post housing through the frame.
Detailed steps for servicing the Switch Infinity mechanism, including cleaning and greasing.
Key checks for ensuring proper dropper post installation and clearance.
Visual representation of components with part numbers and a prep key.
Comprehensive list of parts with part numbers, descriptions, torque, and quantity.
List of specific rebuild kits for various bike components.
Details on kits for AXS conversion, Fox bearings, frame protection, and more.
Explains differences between TURQ/Carbon series and Switch Infinity technology.
Information on compatible fork travel and maximum tire size.
Details on water bottle compatibility and crank/bottom bracket standards.
Specifications for rear wheel axle and headset type used on the SB160.
Guidance on maximum rotor size and stealth seatpost dropper compatibility.
Information on designed chainline and integrated ISCG '05 mounts.
Details on compatible shock types, hardware, and recommended sag percentage.
Discussion on mullet conversion possibility and headset top cap specification.
Details on frame warranty coverage, paint, and conditions for repair or replacement.
Legal disclaimer regarding damages and contact information for Yeti Cycles.
To Next Page
