Yeti SB160 - Switch Infinity V1 Bearing Assembly; Bearing Removal (V1); Bearing Installation (V1)

SB160 | OWNER’S MANUAL
13
SWITCH INFINITY V1 BEARING ASSEMBLY
Remove drive side bearing and axle sleeve
Remove non-drive side bearing
Press non-drive side bearing into switch innity housing (ensure extended race is facing outward
from switch innity body).
Place axle sleeve in body and press drive side bearing into housing
1 1
2
2
BEARING INSTALLBEARING REMOVAL
DRIVE SIDE BEARING DRIVE SIDE BEARING
1 2
2 1