.
'3".&"44&.#-:
Make sure your tools are in good condition.
A worn allen key can round the hex on a bolt
not allowing for proper torque.
Torque settings are listed throughout the
instructions. It is important to prep all bolt
threads. The instructions denote whether to
use a Loctite compound or grease.
:&5*5*14 500-4/&&%&%
Warning: Service on Yeti bicycles requires special knowledge
and tools. Yeti Cycles recommends that all service and
repairs be performed by an authorized Yeti Dealer
• 3mm allen key
• 4mm allen keys
• 5mm allen keys
• 6
• 10mm allen key
• Guide pin tool (Or two)
• C
• Torque wrench
• Grease
• Blue (242) Loctite
0.
All the parts you’ll need to get your SB130
frame assembled. Please refer to the exploded
view later in this manual for more information.
0.
P S E S
0.
R T S S P I
B L (200020311)
*Torque to 3Nm.
0.
S 4 W 30003014 4 6 C
S (3000300) B L 4
I 4 C S
I L
O
S
I L
To Next Page
Loading...
