YOKOGAWA Daqstation DX2000

4-42
IM 04L42B01-01E
• OperationLog(OnlyonDXswiththe/AS1advancedsecurityoption)
To switch displays, in the display
selection menu, select LOG >
CHANGE DISP ITEM, and press
DISP/ENTER.
Operation type*
User name
Operation*
Date and time
Detailed display
Additional information display
When you move the cursor to an
item that has additional informa-
tion, the Add.info. soft key
appears at the bottom of the
screen. Press the soft key to
display the additional information.
The additional information is
displayed using the command
syntax.
See the Communication Manual,
IM04L41B01-17E.
Press ESC to close the additional
information display.
Cursor (blue arrow)
Move the cursor with the arrow
keys.
* See the Advanced Security Function (/AS1) User’s Manual, IM 04L41B01-05EN.
• ChangeSettingsLog(OnlyonDXswiththe/AS1advancedsecurity
option)
Operation type (see the table below)
User name
Saved setup file name
Date and time
Operationtype Description
K Key operations
C Communication operations
4.9DisplayingaListofOperationLogs