YOKOGAWA Daqstation DX2000

5-8
IM 04L42B01-01E
5.4 WritingMessages
Write messages.
SetupScreen
• MessageWriteGroup
Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic
setting mode), and select the Environment tab > View,Message,Input,Tag.
• SettingtheMessages
Press MENU (to switch to setting mode), and select the Menu tab > Message.
SetupItems
• Message
 • Writegroup
This setting applies only for messages that are written using keys.
Settings Description
Common Write the message to all groups.
Separate Write the message to the displayed group.
If you are using the multi batch function (/BT2 option), see the DX1000/DX1000N/DX2000 Multi
Batch (/BT2) User’s Manual, IM04L41B01-03E.
 • Power-failmessage
See section 5.17.
 • Changemessage
See section 5.3.