YOKOGAWA Daqstation DX2000

5-13
IM 04L42B01-01E
Operations for Changing the Displayed Contents
1
2
3
4
5
6
7
8
9
10
11
12
13
App
Index
5.7 DisplayingaScaleontheTrendDisplay
Display a scale on the trend display.
For a description of the function, see section 1.3.
SetupScreen
• ScalePositionandNumberofScaleDivisions
Press MENU (to switch to setting mode), and select the Menu tab > Meas channel >
Zone,Scale,Bargraph.
• NumberofDisplayedScaleDigitsandCurrentValueIndicator
Press MENU (to switch to setting mode), and select the Menu tab > Display > Trend,
Bargraph,LCD,Monitor.
• ShowingtheScales
To show scales on the trend display, press
DISP/ENTER
(show the display
selection menu) > the
rightarrowkey
(show the sub menu), and select
SCALE
ON
(see section 4.2).
SetupItems
• First-CH/Last-CH
Select the target channels. The target channels are common with the other items that
are displayed on the screen.
• Scale>Position
Select the scale display position on the trend display from 1 to 10. Select Off if you do
not wish to display the scale.