YOKOGAWA Daqstation DX2000 User Manual

5-39
IM 04L42B01-01E
Operations for Changing the Displayed Contents
1
2
3
4
5
6
7
8
9
10
11
12
13
App
Index
• ChangingtheDisplayOrderoftheFUNCKeyMenu
Menu items are displayed in order by number. In addition, menu items appear when
the corresponding function can be used.
1.
Press the arrowkeys to select a menu item.
2.
Press the Select soft key.
The menu item is enclosed in a red frame.
3.
Press the arrowkeys to select the destination.
4.
Press the Transfer soft key.
The menu item moves to the selected number position.
• DescriptionoftheFUNCKeyMenus
For a description of each item, see section 4.1.
• Enabling/DisablingtheDisplayMenuandSubMenu
Items whose menu name is white are shown.
1.
Press the arrowkeys to select a menu item.
2.
Press the View or Hide soft key.
If you press the Hide soft key, the menu name is displayed in gray, and does not appear in
the display selection menu.
• ChangingtheDisplayMenu/SubMenuPositions
1.
Press the arrowkeys to select a menu item.
2.
Press the Select soft key.
The menu item is enclosed in a red frame.
3.
Press the arrowkeys to select the destination.
4.
Press the Transfer soft key.
The menu item moves to the selected position.
• Showing/HidingSeparators
1.
Press the arrowkeys to select a menu item.
2.
Press the Separate soft key.
A separator (line) is displayed between the current item and the lower item.
If you select a menu item whose separator is already shown, this operation hides the
separator.
You can set up to three separators in the display selection menu and each sub menu.
5.18ChangingtheFUNCKeyMenuandDisplaySelectionMenu

YOKOGAWA Daqstation DX2000 Specifications

General

Brand	YOKOGAWA
Model	Daqstation DX2000
Category	Recording Equipment
Language	English