YOKOGAWA Daqstation DX2000

6-13
IM 04L42B01-01E
Saving and Loading Data
1
2
3
4
5
6
7
8
9
10
11
12
13
App
Index
• ChangingSettingsandPerformingFileOperationsduringRecording
(Memorysampling)
If you are using the multi batch function (/BT2 option), if even one batch group is being
recorded, the DX is recording (memory sampling).
 OnDXswithoutthe/AS1advancedsecurityoption
You can change all settings except for the ones listed below.
• Basicsettings
• Inputrange
• Memorysamplingon/off
• Computationchannelcalculationexpressionsandconstants
• TLOG
• Trendinterval
• Filesaveinterval
• Timerandmatchtimetimer
 OnDXsWiththe/AS1AdvancedSecurityOption
You can change the following settings and perform the following file operations. The
administrator can perform all operations. Users can only perform operations that have
been permitted. The setting menu that appears varies depending on the operations
that can be performed.
 SettingChanges
• Dateandtimesettings
• Alarmsettings
• Alarmdelaytimesettings
• Calibrationsettings
• Destinationdirectorysettings
• Administratorsettings*
• Usersettings*
* See the Advanced Security Function (/AS1) User’s Manual, IM 04L41B01-05EN.
 FileOperations
• Loadingdisplaydatafiles
• Loadingeventdatafiles
• Listingthefilesontheexternalstoragemedium
6.4Starting/StoppingtheRecordingandSavingtheMeasuredData,SavingtheMeasuredDatathroughKey
Operation