YOKOGAWA Daqstation DX2000

8-8
IM 04L42B01-01E
AutoLogout
If auto logout is enabled, you are automatically logged out if there is no key operation
for a specified time.
• ChangingthePassword
 UsingKeys
1.
In the operation mode, press FUNC.
The FUNC key menu appears.
2.
Press the Passwordchange soft key.
A window appears for you to enter the current password.
3.
Enter the current password and press DISP/ENTER.
A window appears for you to enter the new password.
4.
Enter the new password and press DISP/ENTER.
A window appears for you to enter the new password again.
5.
Enter the new password and press DISP/ENTER.
The window closes, and the new password is activated.
8.3LogginginandLoggingOut