YOKOGAWA Daqstation DX2000 User Manual

11-18
IM 04L42B01-01E
Code Message
562 Ethernet cable is disconnected.
Further details are provided by the character string that appears after error code 562.
CharacterStringandDetails
ON
Detected that an Ethernet cable was connected.
OFF
Detected that an Ethernet cable was disconnected.
563 The command is sent to DHCP.
Further details are provided by the character string that appears after error code 563.
CharacterStringandDetails
RENEW
Requesting address renewal to the DHCP server.
564 The response was received from DHCP.
Further details are provided by the character string that appears after error code 564.
CharacterStringandDetails
RENEWED
Address renewal complete.
EXTENDED
Address release extension request complete.
RELEASED
Address release complete.
565 IP address was set.
Further details are provided by the character string that appears after error code 565.
CharacterStringandDetails
IPCONFIG
Assigned the IP address.
566 It is a setting that doesn’t register hostname to the DNS server.
Further details are provided by the character string that appears after error code 566.
CharacterStringandDetails
NOREQUEST
Configured not to register the host name.
567 The hostname was registered to DNS server.
Further details are provided by the character string that appears after error code 567.
CharacterStringandDetails
UPDATE
Registered the host name to the DNS server.
568 The hostname was deleted from DNS server.
Further details are provided by the character string that appears after error code 568.
CharacterStringandDetails
REMOVE
Assigned the IP address.
OFF
Removed the host name from the DNS server.
571 Querying KDC server.
572 Saving template file.
573 Loading template file.
11.1AListofMessages

YOKOGAWA Daqstation DX2000 Specifications

General

Brand	YOKOGAWA
Model	Daqstation DX2000
Category	Recording Equipment
Language	English