IM 701450-02E
28
Working with the DL7400
Saving Waveform Data to a Storage Medium
User’s manual section 12.8, “Saving/Loading the Waveform Image Data”
You can save the waveform data displayed on screen to a storage medium. When the waveform is saved, its vertical
axis, horizontal axis, and trigger settings are also saved.
Save menu
7 Execute the save.
1 Press the FILE key.
5 Turn the jog shuttle to select a save
medium.
6 Press the SELECT key to enter the
desired setting.
Drive name of the storage medium
See previous page.
These settings not required by
this operation guide, but you
can enter them as needed.
2 Choose Waveform
(waveform data).
3 Display the Save menu.
4 Display the File List.
FILE
Displaying thumbnails of the screen image data
User’s manual section 12.13, “Displaying Thumbnails of Saved Screen Image Data”
You can display thumbnail (miniature) images of the saved screen image data.
Thumbnails make it easy to get a visual overview of what data has been saved.
From the FILE or IMAGE menu, select
File List > File, then press the SELECT key.
Thumbnail
Thumbnail
list display
From the IMAGE menu, press the
Thumbnail soft key.
To Previous Page
Loading...
