YOKOGAWA DPharp EJA530E

To Next Page

User’s

Manual

Contents

1. Introduction

1.1 For Safe Use of Product ..............................................3

1.2 Warranty ......................................................................5

2. Handling Cautions

.................................7

..............................7

..................................................7

......7

..................................... 31

...................... 31

................................................... 32

................................ 33

3. Installation

3.1 Mounting................................................................... 34

3.2

......................................34

............ 35

.................. 36

............................................. 37

.................................... 38

............. 38

4. Installing Impulse Piping

................... 39

..................... 42

115 42

5. Wiring

5.1 Wiring Precautions ................................................... 44

...... 44

5.3 Wiring ....................................................................... 47

......... 49

5.5 Grounding ................................................................ 51

........... 51

6. Operation

6.1 Preparation for Starting Operation ........................... 52

.............................................. 52

.......................................... 53

7. Errors and Countermeasures

EJX and EJA-E Series

Differential Pressure and

Pressure Transmitters

Installation Manual

Main Page

Need help?

Do you have a question about the YOKOGAWA DPharp EJA530E and is the answer not in the manual?

YOKOGAWA DPharp EJA530E Specifications

General

Model	EJA530E
Category	Transmitter
Manufacturer	Yokogawa
Series	DPharp
General Use	Pressure Measurement
Type	Differential Pressure Transmitter
Stability	±0.1% of URL per 10 years
Operating Temperature	-40 to 85 °C
Ambient Temperature Limits	-40 to 85 °C
Storage Temperature	-40 to 85 °C
Span Limits	0.5 to 10000 kPa
Pressure Range	0 to 4 MPa
Output Signal	4 to 20 mA DC with digital communication
Power Supply	10.5 to 42 V DC
Process Temperature Limits	-40 to 120 °C
Communication Protocol	HART
Process Connection	1/2 NPT, 1/4 NPT, G1/2
Electrical Connection	1/2 NPT, M20 x 1.5
Housing Material	Aluminum
Material	Stainless steel
Protection Rating	IP67