Need help?Do you have a question about the YOKOGAWA Dpharp EJX110A and is the answer not in the manual?
General| Model | EJX110A |
|---|---|
| Category | Transmitter |
| Manufacturer | Yokogawa |
| General Use | Differential Pressure Measurement |
| Stability | ±0.1% of URL per 10 years |
| Ambient Temperature Limits | -40 to 85 °C |
| Housing Material | Aluminum alloy or Stainless steel |
| Output Signal | 4 to 20 mA |
| Process Temperature Limits | -40 to 85 °C |
| Process Connection | 1/2 NPT |
| Electrical Connection | M20 x 1.5 |
| Protection Rating | IP67, NEMA 4X |
| Material | Stainless Steel |
Covers manual provision, safety guidelines, warranty terms, and ATEX documentation availability for EJX series transmitters.
Guidance on checking, unpacking, storing, and performing insulation/dielectric strength tests on the instrument.
Precautions for selecting installation locations, pressure connections, and safe operational practices for the transmitter.
Covers explosion-protected installation, FM, CSA, ATEX, IECEx certifications, EMC standards, and directives.
To Next Page
