YOKOGAWA SMARTDAC+ GP10 - Page 29

21
IM 04L51B01-18EN
Explicit Message
Datatobeaccessed Tagname SupplementaryInformation
Datatype
INT32
Individual alarm ACK
(alarm ACK Channel level)
dint[12653] 0: Fixed at 0 when reading
1: Alarm level 1 ACK
2: Alarm level 2 ACK
3: Alarm level 3 ACK
4: Alarm level 4 ACK
• Read/Writemessage
Message writing is executed when a message (free message or preset message) is written
in the message body. In the case of a preset message, the written content is ignored.
Datatobeaccessed Tagname SupplementaryInformation
Datatype
INT32
Datatype
STRING
Write a message
(specify the write method)
dint[12700] ‒ 0: Fixed at 0 when reading
1: Write a preset message
2: Write a free message
Write a message
(message number)
dint[12701] ‒ 0: Fixed at 0 when reading
Preset message: 1 to 100
Free message: 1 to 10
Write a message
(specify the write destination)
dint[12702] ‒ 0: All display groups; fixed at
0 when reading
1 or greater: The specified
display group
Write a message
(batch group number)
dint[12703] ‒ 0: Fixed at 0 when reading
1 or greater: Batch group
number
Write a message
(body of message)
dint[12704] string[12704] 0: Fixed at 0 when reading
UTF-8 characters (2
characters)
Up to 35 characters (except
the number of valid characters
is 32)
Message writing is executed
when a message is written
here.
Ignored for preset messages
Attach a terminator ‘\0’ at the
end
• Read/Writebatchinformation
Lot number, Batch number, Batch gropu number
The content is reflected when the lot number or batch number is updated.
when multi batch is not in use
Datatobeaccessed Tagname SupplementaryInformation
Datatype
INT32
Datatype
STRING
Lot number dint[12800] ‒ Lot number data
Batch number dint[12801] string[12801] UTF-8 characters (2
characters)
Up to 32 characters [attach
the terminator ‘\0’ at the end]
When multi batch is in use
Datatobeaccessed Tagname SupplementaryInformation
Datatype
INT32
Datatype
STRING
Batch group number dint[12850] ‒ 1 or greater: Batch group
number
When reading, the batch
group number that performed
writing previously
Default value: 0
Continued on next page