YOKOGAWA vigilantplant ProSafe-RS - Connecting an Input;Output Module to a Terminal Board

5.2.2 Connecting an Input/Output Module to a Terminal
Board
Use a signal cable to connect an input/output module to a terminal board.
n
Signal Cable Interface Adapters
The following figures show examples of external view of the I/O modules connected via signal
cable interface adapters. By an optional order for the signal cable, the cable connector with a
prevention pin of false insertion is available.
CN1
SDV144
SAI143
CN1
Dedicated signal cable with prevention
pin of false insertion (option)
prevention pin of false insertion
Figure 5.2.2-1 Input/Output Modules Connected via Signal Cable Interface Adapters
<5.2 How to Connect Signal Cables > 5-8
IM 32Q06C10-31E 4th Edition : Jan.30,2015-00