IM 253401-01E
3
Standard Accessories
The following standard accessories are supplied with the instrument. Make sure that all items
are present and undamaged.
Name Part No. Q’ty Remarks
1 Power cord see page 2 1 —
2 Power fuse A1346EF 1 only for the three-phase model
Time lag, 0.5A, 250V
(located in the fuse holder)
Not provided with the single-phase model
3 24-pin connector A1004JD 1 For remote, D/A output
(only provided with options /DA4, /DA12 or
/CMP)
4 User’s Manual IM253401-01E 1 this manual
5 Rubber feed A9088ZM 1 set
6 Clamp filter (Ferrite core) A1179MN 1 for WT110 only
1. One of the power cords is supplied according
to the instrument's suffix code
3. 4.
DFJ R
2. 5. 6.
Optional Equipment
The following optional equipment is available. Upon receiving any optional equipment, make
sure that all the items ordered have been supplied and they are in good condition.
If you have any questions regarding optional equipment, or if you wish to place an order,
contact the dealer from whom you purchased the instrument.
Name Parts No. Minimum Q’ty Remarks
Digital printer 740921 1 ESC/P compatible, RS-232-C/Centronics
Note
It is recommended that the packing box be kept in a safe place. The box can be used for transporting the
instrument.
Checking the Contents of the Package
To Next Page
Loading...
Need help?
General
