YOKOGAWA YS100 Series User Manual

TI 01B08A02-07EN
10
2014.06.13
Select Tools > Program check to run a program check.
(1) If an error occurs, check the program.
4.7 Checking programs
Care is required when using independent 2-loop control.
Ex.: If BSC1 is listed after BSC2, select the control function based on the
last BSC1.
(becomes single loop control)
In that case, please correct the control function selection.
4.7.1 Selecting control functions

YOKOGAWA YS100 Series Specifications

General

Brand	YOKOGAWA
Model	YS100 Series
Category	Controller
Language	English