Yokota YS-e600 - Wireless Pairing Process; Step-by-Step Pairing Guide

YS-e Instruction Manual 76-QD0444EN-00Y01-00.doc
15
5. Pairing
To operate the tool, pairing with the wireless unit (initial connecting action) is required.
After turning on the wireless unit, carry out pairing according to the following steps.
5.1. Install the battery pack to the tool.
5.2. Pull the throttle lever.
It beeps and the tool is activated.
5.3. Press the pairing button of the wireless unit for a while.
Press the button until the LED of TOOL1 of the wireless unit lights up in red.
5.4. Press the pairing button of the wireless unit for a short period and select the TOOL number
to be paired.
Every time you press the button for a short period, the lighting of LED moves.
5.5. Press the pairing button of the wireless unit for a while.
Press the button until the LED blinks fast.
Pairing button