YS-e Instruction Manual 76-QD0444EN-00Y01-00.doc
12
3. Each part description
・Tool
① Throttle lever
Lever to start or stop the rotation of the main shaft of the tool.
② Reverse lever
Lever to switch the rotation direction (right/left) of the main shaft of
the tool.
③ OK/NG LED
LED to inform the worker of tightening OK, occurrence of error, etc.
(do not stare into LED light for long time)
④ Buzzer (built-in)
Buzzer to inform the worker of tightening OK, occurrence of error,
etc.
⑤ Pairing button (built-in)
Button to do pairing with the wireless unit.
⑥ Cooling fan (built-in)
Fan to cool motor section and pulse unit.
⑦ Air intake of cooling fan
Air intake of cooling fan.
⑧ Exhaust outlet of cooling fan
Exhaust outlet of cooling fan.
Also used as insertion opening for torque adjustment pin.
⑨ Battery pack
Detachable battery pack for driving the tool.
●Descriptions of symbols
：Be sure to read this Manual before use and use the product correctly after you fully understand
its contents.
②
③
④
⑤
⑥
⑦
⑧
⑨
①
To Next Page
Loading...
