Yongnuo RF-603 - Wireless flash;studio flash trigger sync

EN
Camera controls one or more flashes and studio flash lights. Purchase YongNuo
studio flash PC sync cable according to different studio flash .
1. Insert the PC connecting cable plug with nut into the PC socket of transceiver.
2. Screw down the nut.
3. Fix the transceiver near the studio flash lights, and insert the cable plug with jack
into the control socket of studio flash lights.
4. Install the transceiver on the hot shoe of the camera, after focusing, press the
shutter release button completely of the camera to shoot with all off-camera
flash lights triggering synchronously, and the flash trigger indicator light will turn
on(red) of transceivers at the same time.
Wireless flash/studio flash trigger sync
8