Yongnuo YN-622N User Manual

14
C o m p o s e m u l t i p l e
groups through additional
purchase transceiver.
Usage
2 Transceiver kit packages
Use 1 off-camera flash or 1 off-
camera flash + 1 on-top flash.
2.Mix Control Mode
Supports the use of flash on
the transmitter or the receiver
wo rk s a t the sam e t im e in
different flash modes include i-
TTL, Manual, RPT flash.
Set the flash on the receiver to Manual or RPT flash mode,
the flash will work according to the mode and parameters
displayed; Set to i-TTL flash mode, it will work according to
the transmitter ’s setting(same to the remote control
mode), the on-top flash refer to p15.
OF F
ON
RE MO TE
MA ST ER
1.Remote Control Mode:
Set the flash(receiver) to i-
TTL flash mode, the flash will
fire according to the flash mode
and param ete rs set by the
t r a n s m i t t e r , s u p p o r t i -
TTL/Manual Flash. ( P9-11)

Yongnuo YN-622N Specifications

General

Brand	Yongnuo
Model	YN-622N
Category	Transceiver
Language	English