1st curtain sync
5.Flash shutter sync
Short press the [SYNC/FN] button to
set the shutter sync mode(except the
multi flash).There will be a relevant
icon displayed on the LCD.
4.ZOOM:Flash Coverage Setting
It supports the controller to set the focal length of the
flash on the transceiver.
Short press the [ZOOM/CH]button,
set the flash focal length of A/B/C
group in sequence, then press the
Select/Set button group and set.
Settings rang supported manual
24-105mm,AU (Automatic).
2nd curtain sync high speed sync
Settings
To Next Page
Loading...
Need help?
General