Yongnuo YN622C-TX E-TTL - Preparation Before Use; YN622 C Transceiver Settings; YN622 C-TX Controller Settings

Preparation Before Use
2.YN622C-TX Controller Settings:
(excluded).
2).Installing the Controller on the Camera .
3).Power on when the power switch slides to [ON].
1).Installing the 2 AA （1.5V）batteries
4).Channel Setting: Long press the [ZOOM/CH] button, then
press the select/set button group to the same channel as
the YN622C transceiver.
HCZ MOO
Ch7
Ch6
Ch5
Ch4
Ch3
Ch2
Ch1
Ch1
1.YN622C Transceiver Settings:
Set the receiving group transceiver
(refer to the user manual of the YN622C).
and channel of the