When using EOS digital cameras released since
2007, you can set the controller functions from the
camera’s menu screen. For the operation of the camera,
please refer to the relevant user manual.
Under the TTL mode, it supports the camera menu setting
FEB function. There will be relevant icon displayed on the
controller. (P.4)
Supports setting the Group A flash zoom through the
camera’s menu .
Cancels the FEB functions or turns on/off AF Assist Beam
Emitter though the C.FN Settings of the external flash menu.
EOS digital cameras released since 2012:support E-
TTL II, manual flash, multi flash, group flash (GR).
E O S d i g i t a l c a m e r a s r e l e a s e d f r o m 2 0 0 7 t o
2011:supports E-TTL II, manual flash, multi flash
*If the 2nd curtain sync enabled, please set the flash
parameters of each group through the controller.
*SS flash mode can not be controlled through the
camera menu.
Control from Camera's Menu Screen
To Next Page
Loading...