What does error code E5 mean on my York Fitness Elliptical Trainer?
Error code E5 on your York Fitness Elliptical Trainer indicates an auto-tension controller error or that it is non-operational. Verify all wires are connected properly.
Why is there no speed display on my York Fitness Exercise Bike?
If there's no speed displayed on your York Fitness Exercise Bike, the wires may be damaged or not properly connected, or the speed sensor might be too far from the magnet. Check that all wires are correctly connected.
Why is the display only partial on my York Fitness Exercise Bike?
A partial display on your York Fitness Exercise Bike may be due to the PA board not being properly connected. Try unplugging and re-plugging the power cord to reset the system. Verify all wires are correctly connected and disconnect and reconnect all cables.
What does error code E1 mean on my York Fitness Elliptical Trainer and how to fix it?
Error code E1 on your York Fitness Elliptical Trainer can indicate several issues: a computer console error, a non-operational or damaged motor, damaged or improperly connected wires, or the user exceeding the maximum weight limit. To resolve this, first verify all wires are properly connected. Then, unplug and re-plug the power cord to reset the system. Also, check to ensure the user is within the maximum weight tolerance.
What does error code E1 mean on my York Fitness Exercise Bike?
Error code E1 on your York Fitness Exercise Bike indicates a computer console error, a non-operational or damaged motor, damaged or improperly connected wires, or the user exceeding the maximum weight. Ensure all wires are correctly connected and that the power cord is properly plugged in. Also, check the maximum user weight.
What does error code E5 mean on my York Fitness Exercise Bike?
Error code E5 on your York Fitness Exercise Bike indicates an auto-tension controller error or that it is non-operational. Verify all wires are properly connected.
How to fix no display on York Fitness Equipment?
If your York Fitness equipment shows no display, this is often due to a lack of power or a system halt. Ensure that the power cord is properly plugged in. Try unplugging it and then plugging it back in to reset the system.
Why is there no speed display on my York Fitness Equipment?
If your York Fitness Equipment is not displaying speed, there may be damaged or improperly connected wires, or the speed sensor might be too far from the magnet. Verify that all wires are connected correctly. If the problem continues, contact your local YORK distributor.
Why is there no speed display on my York Fitness Elliptical Trainer?
The absence of a speed display on your York Fitness Elliptical Trainer may be caused by damaged or improperly connected wires, or the speed sensor being too far from the magnet. Verify that all wires are connected properly.
What to do if my York Fitness Elliptical Trainer shows no display?
If your York Fitness Elliptical Trainer's display is blank, it could be due to a power issue or the system being halted. First, ensure the power cord is securely plugged in. If that doesn't work, try unplugging and then re-plugging the power cord to reset the system.
General| Type | Home Gym |
|---|---|
| Resistance System | Weight Stack |
| Material | Steel |
| Included Accessories | Lat Bar |
| Exercises | Multiple |
General safety advice for assembly, operation, and user conduct.
Steps to prepare the work area and components before starting assembly.
Instructions for installing front/rear stabilizers and assembling the main frame.
Details on attaching the flywheel, crank arms, and pedals to the frame.
Instructions for assembling pedal arms and lower body components.
Steps for attaching handlebars and connecting them to the main frame.
Instructions for mounting the console and connecting its wiring.
Instructions on connecting the power adapter and turning on the console.
Guide to identifying and resolving common issues with the equipment.
To Next Page