To Next PageTo Next Page
Need help?Do you have a question about the York HIC4008B21S and is the answer not in the manual?
General| Brand | York |
|---|---|
| Model | HIC4008B21S |
| Category | Air Conditioner |
| Language | English |
Guidelines for safe operation and installation of the air conditioning units.
Details specific to the 4-Way Cassette indoor unit model.
Explanation of the model naming convention for the units.
List of available 4-Way Cassette models and their capacities.
Key technical specifications and dimensions for the 4-Way Cassette units.
Drawings and measurements of the unit's physical dimensions.
Detailed information on the components of the indoor heat exchanger and fan.
Required clearances and space for installation and operation of the unit.
Calculation of the sensible heat factor for various models under specific conditions.
Electrical specifications including voltage, power, and current ratings.
Noise level characteristics for different operating conditions and frequencies.
Details of the refrigerant circuit and its components within the system.
Describes the operational sequences for cooling, heating, and other modes.
Control logic to prevent freezing during cooling or dry operations.
Prevention mechanism for excessively high outlet air temperatures.
How the motion sensor influences unit operation and airflow.
Settings for safety and control devices like thermostats and fuses.
Electrical wiring schematics for the indoor unit and its components.
List of optional parts and the models they adapt to.
Details on the anti-bacterial filter, including specifications and installation.
Information on the filter box, its dimensions, and installation.
Details on the air outlet shutter plate, including function and installation.
Information on the fresh air intake kit, its specifications, and installation.
Details on the T-tube connecting kit for fresh air intake.
Information on the duct adapter for fresh air intake, including specifications.
Details of the IR receiver kit, its specifications, dimensions, and applicable models.
Procedures for installing the IR receiver kit, including accessories and wiring.
Configuration options and DIP switch settings for the IR receiver kit.
Explains emergency operation and DIP switch settings for optional functions.
How to identify and configure multiple IR receiver kits for side-by-side operation.
Control of multiple indoor units simultaneously using the IR receiver kit.
Test run procedures and alarm indications for wireless controller operation.
Details of the 3P connector cable for remote control and status monitoring.
Information on the remote temperature sensor and its configuration.
Kit for integrating with third-party controllers and BMS for basic functions.
Table for cooling capacities based on indoor and outdoor unit conditions.
Table for heating capacities based on indoor and outdoor unit conditions.
