York HIC4008B21S - Filter Box

OPTIONAL PARTS
TC-17005-rev.1
3-3
Unit: inch [mm]
Dimension
Indoor Unit
a b
008 to 018 MBH
11-7/16
[291]
9-5/16
[236]
024 to 048 MBH
13-7/16
[341]
11-1/4
[286]
3.3 Filter Box: B-160H3
Specications
Model
Item
B-160H3
Applicable Indoor Unit Model
((H,Y,C)IC4**B21S)
MBH 008 to 048
Material
Polyethylene, Galvanized Steel Plate,
EPDM-FO, Polystyrene
Color of Foam Bluish Gray
Weight lbs (kg) 5.5 (2.5)
Applicable Air Filter F-71M-K2 F-160M-K2
NOTES:
1. The total height of the unit is increased by approximately 2-3/16 inches (55mm) when the lter box is
installed. Pay attention to the amount of space needed for installation.
2. Refer to the “Installation Manual for Filter Box” for installation details.
Air Intake Grille
(Attached with Air Panel)
Air Filter
(Attached with Air Panel)
Min. 3/8 [10]
Decorative Panel (Option)
1-15/16 [50]
2-3/16 [55]
a
1/2 [12]
b
3/16 [5]
(After Compression)
33-1/16 [840]
Insulation
Filter Box
6-1/8 [155]
Ceiling
27-9/16 [700]
(Decorative Panel Mounting Position)
(Decorative Panel Mounting Position)
Galvanized Steel Plate
Polystyrene
Insulation
(Polyethylene)
2-3/16 [55]
(Height of Filter Box)
3/8 [10]
(Before Compression)
Insulation
(EPDM)
13/16 [20]
Filter Holder
(4 Places)
33-7/16 [850]
27-9/16 [700] 33-7/16 [850]
21-5/8 [549]
21-5/8 [549]
Mounting Hook
(4 Places)
1-15/16 [50]
Anti-bacterial
Air Filter
(Option)
Indoor Unit
Side View
Decorative Panel Side
Indoor Unit Side
Dimensional Data
Installation State