Need help?Do you have a question about the York MILLENNIUM YIA-ST-1A1 and is the answer not in the manual?
General| Refrigerant | R-410A |
|---|---|
| Model | YIA-ST-1A1 |
| Category | Chiller |
| Brand | York |
| Type | Air Cooled |
Explains the manual's structure and how to use its sections.
Describes the chiller's basic components and absorption process.
Details the control center layout and how to view system parameters.
Covers viewing operational data, system parameters, and programmable setpoints.
Instructions for configuring system setpoints and modes via the control center.
Explains the purpose and usage of service keys and system operating modes.
Outlines the initial safety checks performed when power is applied to the micro panel.
Details the monitoring of pump motor overloads and thermal switches for safety.
Details how to manually control system pumps and perform dilution cycles.
Explains the logic for starting and stopping refrigerant pumps based on float switches.
Details the process and conditions for automatic decrystallization cycles.
Explains how strong solution temperature affects unit loading based on RTLC.
Explains the pull down demand feature for energy savings during unit startup.
Details how remote load limits are communicated and applied to the unit.
Explains the necessity, initiation, and termination conditions of dilution cycles.
Explains the necessity of the purge system and how to initiate a purge cycle.
To Next Page