York Pegasus Plus 51072 - Step 3: Securing Computer Assembly; Step 4: Installing Side Covers

Pegasus Plus | OWNER’S MANUAL • 7
Step 3
Rotate the computer assembly until the xing holes on
the handle bar bracket align to the holes on handle bar
posts as shown.
Secure the handle bar bracket to the handle bar posts
by using two allen head bolts and two at washers.
C. SCREW x 2
E. WASHER x 2
1.
2.
Step 4
Attach the right handle bar post cover to the right base
frame and secure, using three machine screws.
Attach the left handle bar post cover to the left base
frame and secure, using three machine screws as
shown.
B. UPRIGHT SIDE CAP x 2
F. SCREW x 6
1.
2.
C
E
C
E
F
B
B
F
ASSEMBLY INSTRUCTION
PegasusPlus_InstructionManual.in7 7 11/27/08 11:24:56 PM