WALL MOUNT
TC-17006-rev.1
2-3
2.4 Dimensional Data
Models: TIWM006B21S and TIWM008B21S
Opening Direction Option 1: Opening Direction Option 2:
NOTES:
1. Removal of the condensate pipe is possible from either side of the knockout holes. If using the left side, install
a condensate hose to the condensate pipe connection at the left side.
2. Make sure there is no gap at the center position of the bracket and the unit. Mount them according to the gure
above.
Unit: inch (mm)
To Next Page
Loading...
