York TIWM018B21S - Configuring Setback Operation Features

OPTIONAL PARTS
TC-17006-rev.1
3-13
3.4 3P Connector Cable: PCC-1A
This accessory connector is utilized to provide remote start/stop capability (binary input) to an indoor unit and
provide operating status (binary output) of an indoor unit's functions. (System Parts: One set contains ve
3P cords.)
3P Connector Cable
Cord
Sensor
2-φ4.5
1-15/16 (50)
1-1/4 (32)3/8 (9)
1-15/16 (50)
1-1/4 (32)3/8 (9)
9/16 (15)
Case
Base
Lead Wire AWG22 (0.3mm
2
)
Approximately
11-13/16inch (300mm)
Connector
(“XARP-03V” of NIPPON
A
CCHAKU TANSHI = JST)
If long cord is needed,
connect field supplied
wires [AWG22 (0.3 to 0.5mm
2
)]
with soldering.
Name 3P Connector Cable
Model PCC-1A
Remarks
One set contains ve 3P connector
cables.
Specications
Item Specication
Model THM-R2A
Case
Material ABS Resin
Color Silky White
Base
Material ABS Resin
Color Silky White
Sensor
Part Name Thermistor
Cord Length approx. 26 ft (8m)
3.5 Remote Sensor: THM-R2A
When a remote temperature sensor is installed with an indoor unit, the indoor unit is congurable to use the
temperature at the location of the remote sensor OR the average of the unit's return air temperature and
the temperature at the location of the remote sensor to control that unit. (reference the specic controller
Installation Manual for function conguration details)
Unit: inch (mm)