JOHNSON CONTROLS
FORM 150.67-EG1 (219)
12
Copper Fin Condenser Coils – The unit coils are constructed with copper fins. (This is
not recommended for units in areas where they may be exposed to acid rain.)
Enclosure Panels (Unit) – Tamperproof enclosure panels prevent unauthorized access
to units. Enclosure panels can provide an aesthetically pleasing alternative to expensive
fencing.
Louvered Panels (Full Unit) – Louvered panels surround the front, back, and sides of the
unit. They prevent unauthorized access and visually screen unit components. Unrestricted
air flow is permitted through generously sized louvered openings. This option is applicable
for any outdoor design ambient temperature up to 115°F (46°C). Recommended for use
with the Low Ambient kit where wind gusts may exceed five mph (eight kph).
Sound Attenuation – One or both of the following sound attenuation options are recom-
mended for residential or other similar sound-sensitive locations.
Compressor Acoustic Sound Blanket – Each compressor is individually enclosed by
an acoustic sound blanket. The sound blankets are made with one layer of acoustical
absorbent textile fiber of 5/8” (15mm) thickness; one layer of anti-vibrating heavy mate-
rial thickness of 1/8” (3mm). Both are closed by two sheets of welded PVC, reinforced for
temperature and UV resistance.
Ultra Quiet Fans – Lower RPM, eight-pole fan motors are used with steeper-pitch fans.
Vibration Isolators – Level adjusting, spring type 1” (25.4mm) or 2" deflection or neo-
prene pad isolators for mounting under unit base rails. (Field-mounted.)
Accessories and Options (Cont'd)
To Next Page
Loading...
