Note: Relief valves must be plugged or capped. Refer to Operations and Maintenance
(Form 160.76-O1).
9. Form 9 - Remove nitrogen and charge unit with refrigerant. Refer to Operations and
Maintenance (Form 160.76-O1).
10. All Units: Complete installation and finally level the unit. Refer to Installation Manual (Form
160.76-N1).
Figure 5: Variable speed drive rigging
Model YK Chillers (Style H) Field Reassembly for Form 3, 7, 9, and 10 Shipment16
To Next Page
Loading...
