York MAXE OPTIVIEW YK User Manual

SERVICE INSTRUCTIONS
MAXE
TM
CENTRIFUGAL LIQUID CHILLERS
Supersedes: 160.54-M1 (402)
Form 160.54-M1 (503)
m
Metric Con ver sions
371-02264-101 (Electro-Mechanical Starter - NEMA 1)
371-02486-101 (Electro-Mechanical Starter - CE)
371-02448-101 (Electro-Mechanical Starter - NEMA 4/12)
371-02264-102 (Solid State Starter - NEMA 1)
371-02486-102 (Solid State Starter - CE)
371-02448-102 (Solid State Starter - NEMA 4/12)
371-02264-103 (Variable Speed Drive - NEMA 1)
371-02486-103 (Variable Speed Drive - CE)
371-02448-103 (Variable Speed Drive - NEMA 4/12)
371-02778-101 (Electro-Mechanical Starter - NEMA 1)
(P Compressors until 8/02)
371-02780-101 (Electro-Mechanical Starter - CE)
(P Compressors until 8/02)
371-02779-101 (Electro-Mechanical Starter - NEMA 4/12)
(P Compressors until 8/02)
371-02778-102 (MOD “B” Solid State Starter - NEMA 1)
(P Compressors until 8/02)
371-02780-102 (MOD “B” Solid State Starter - CE)
(P Compressors until 8/02)
371-02779-102 (MOD “B” Solid State Starter - NEMA 4/12)
(P Compressors until 8/02)
MODEL YK (THROUGH STYLE F)
371-02778-103 (Variable Speed Drive - NEMA 1-4)
(P Compressors until 8/02)
371-02780-103 (Variable Speed Drive - CE)
(P Compressors until 8/02)
371-02779-103 (Variable Speed Drive - NEMA 4/12)
(P Compressors until 8/02)
371-04118-101 (Electro-Mechanical Starter – NEMA 1)
(Style F Chillers)
371-04118-102 (Style B Solid State Starter – NEMA 1)
(Style F Chillers)
371-04118-103 (Variable Speed Drive – NEMA 1)
(Style F Chillers)
371-04119-101 (Electro-Mechanical Starter – NEMA 4/12)
(Style F Chillers)
371-04119-102 (Mod “B” Solid State Starter - NEMA 4/12)
(Style F Chillers)
371-04119-103 (Variable Speed Drive – NEMA 4/12)
(Style F Chillers)
371-04120-101 (Electro-mechanical Starter – CE)
(Style F Chillers)
371-04120-102 (Mod “B” Solid State Starter – CE)
(Style F Chillers)
371-04120-103 (Variable Speed Drive – CE)
(Style F Chillers)
OPTIVIEW™ CONTROL CENTER
00614VIP

York MAXE OPTIVIEW YK Specifications

General

Brand	York
Model	MAXE OPTIVIEW YK
Category	Chiller
Language	English

Summary

SECTION 1 INTRODUCTION

SECTION 2 SYSTEM ARCHITECTURE

SECTION 3 MICROBOARD

SECTION 4 I/O BOARD

SECTION 5 LIQUID CRYSTAL DISPLAY

SECTION 6 DISPLAY INTERFACE BOARD

SECTION 7 DISPLAY BACKLIGHT INVERTER BOARD

SECTION 8 KEYPAD

SECTION 9 POWER SUPPLY

SECTION 10 CURRENT MODULE (CM-2)

SECTION 11 SOLID STATE STARTERS

MOD “B” SERIAL DATA INTERFACE LIQUID COOLED SOLID STATE STARTER

Details the Mod "B" LCSSS interface and operation with OptiView.

MOD “A” MULTIPLEXED DATA INTERFACE LIQUID COOLED SOLID STATE STARTER

Describes the Mod "A" LCSSS interface and operation.

SECTION 12 ADAPTIVE CAPACITY CONTROL BOARD

SECTION 13 PROXIMITY PROBE

SECTION 13A HIGH SPEED THRUST BEARING LIMIT SWITCH

Describes the high-speed thrust bearing limit switch as an alternative to the proximity probe.

SECTION 14 REFRIGERANT LEVEL CONTROL

SECTION 15 OIL PUMP VARIABLE SPEED DRIVE

SECTION 16 MICROGATEWAY

SECTION 17 PRESSURE TRANSDUCERS

SECTION 18 TEMPERATURE THERMISTORS

SECTION 19 REMOTE SETPOINTS

SECTION 20 HOT GAS BYPASS

SECTION 21 SMART FREEZE PROTECTION

SECTION 22 SURGE PROTECTION

SECTION 23 SYSTEM CALIBRATION, SERVICE SETPOINTS AND RESET PROCEDURES

ELECTRO-MECHANICAL STARTER APPLICATIONS

Calibration procedures for EM starters and related components.

SOLID STATE STARTER APPLICATIONS

Calibration procedures for Solid State Starter types.

COMPRESSOR MOTOR VARIABLE SPEED DRIVE APPLICATIONS

Calibration procedures for VSD applications.

SECTION 24 DIAGNOSTICS & TROUBLESHOOTING

MAIN DIAGNOSTICS SCREEN

Describes the main screen for accessing various diagnostics.

KEYPAD TEST

Verifies keypad operation and Microboard response to key presses.

DISPLAY TEST

Tests display operation, including bit patterns and color screens.

SERIAL INPUTS / OUTPUTS TESTS

Verifies the correct operation of serial data ports (COM 1-5).

DIGITAL INPUTS / OUTPUTS TESTS

Analyzes digital inputs and outputs of the Microboard.

SECTION 25 SYSTEM COMMISSIONING CHECKLIST

SECTION 26 SERVICE INFORMATION LETTERS / BULLETINS

SI0006 - SOFTWARE ENHANCEMENTS EFFECTIVE MAY 2001

Details software enhancements from May 2001, including surge protection and bypass.

SI0019 - SOFTWARE ENHANCEMENTS EFFECTIVE MARCH 2002

Outlines software enhancements from March 2002, including setpoint changes.

SI0034 (203) - SOFTWARE ENHANCEMENTS EFFECTIVE AUGUST 2002

Details software enhancements from August 2002, including flow sensors.

SI0058 - SOFTWARE ENHANCEMENTS EFFECTIVE FEBRUARY 2003

Covers software enhancements from February 2003, including VSD and Microgateway.

SI0062 - SOFTWARE ENHANCEMENTS EFFECTIVE MARCH 2003

Details software enhancements from March 2003, including chiller style setpoint.