York YK Series - Page 144

FORM 160.54-O1
ISSUE DATE: 9/10/2014
JOHNSON CONTROLS
144
SECTION 2 - OPTIVIEW CONTROL CENTER INTRODUCTION
Custom User ID (4)
Access Level Required: SERVICE
This allows the user to specify up to four (4) custom
User ID values. Each User ID will then require a cor-
responding password and user level. A User ID can be
defined for various maintenance personnel.
Custom User Password (4)
Access Level Required: SERVICE
This allows the user to specify up to four (4) custom
password values. Each password will then require a
corresponding User ID and user level.
Custom User Access Level (4)
Access Level Required: SERVICE
This allows the user to specify up to four (4) custom
User Access Levels. Each access level will then require
a corresponding password and User ID.
Date Format
(Software version C.OPT.01.23.307 and later)
Access Level Required: OPERATOR
This setpoint allows the date format to be displayed in
DDD MMM YYY (default), DD.MM.YYY or YYYY-
MM-DD.
NAVIGATION
Home
Access Level Required: VIEW
Returns user to HOME Screen.
Setup
Access Level Required: VIEW
Returns user to SETUP Screen.