York YLAA0125 - FIGURE 32 - Unit Clearances - All Models; Clearances

JOHNSON CONTROLS
88
FORM 150.72-ICOM6
ISSUE DATE: 12/29/2017
SECTION 5 – TECHNICAL DATA
CLEARANCES
See Figure 32 below for minimum clearances for all
YLAA units.
NOTES:
1. No obstructions allowed above the unit.
2. Only one adjacent wall may be higher than the unit.
3. Adjacent units should be 10 feet (3 Meters) apart.
FIGURE 32 - UNIT CLEARANCES – ALL MODELS
(1.3 m)
(2 m)
(2 m)
(2 m)