Factory Level
Accessible with the Factory password. Allows configuration of all unit parameters.
Super User Level
Accessible with the Super User password. Allows setting of Super User, User and Direct parameters.
User Level
Accessible with password 22. Allows access to all parameters the user normally sets.
Direct Level
Accessible without a password. Allows for reading of the values detected by the probes, as well as other
system values. Can be used by the user without affecting unit operation.
General
Modification of the parameters that affect basic unit configuration should be made with the controller in
Standby position.
1
User manual
1.2 Operating instructions µC2
8
To Next Page
Loading...
