Need help?Do you have a question about the York YLPA and is the answer not in the manual?
General| Refrigerant | R-410A |
|---|---|
| Cooling Capacity | 24, 000 - 60, 000 BTU/h |
| Heating Capacity | 24, 000 - 60, 000 BTU/h |
| Voltage | 208/230V |
| Type | Air Source |
| Capacity | 2-5 Ton |
| Stages | Single-Stage |
Outlines the components and protection within the unit's electrical panels.
Describes safety features that require manual reset after a fault.
Lists automatic reset safety shutdowns for the unit.
Diagram and explanation of refrigerant flow during cooling.
Diagram and explanation of refrigerant flow during heating.
Specifies site selection criteria for optimal unit performance.
Details required clearances for air-flow and service access.
Recommendations for connecting customer pipework to the unit.
Specifies acceptable water parameters for heat exchanger longevity.
Recommendations for safe and satisfactory unit electrical hookups.
Cooling performance metrics across various temperatures and loads.
Part load cooling performance metrics across various temperatures.
Heating performance metrics across various temperatures and loads.
Specifies the operational limits for temperature and voltage.
Provides electrical specifications such as ampacity and fuse sizes.
To Next Page
