Hydro kit (pack)
These units include a pack assembled with the components of a hydro kit. This assembly is located within
the unit frame and does not increase the footprint of same. It includes the following components: centri‐
fugal pump, expansion tank loaded with nitrogen at 1,5 bar, safety valve set to 6 bar, flow switch, air
bleed valve and drain valve. Also includes a mesh filter for the water circuit. This filter is supplied loose
for installation at the most convenient point.
Protecting grids
To protect the coils from possible impacts. Made of steel rods and painted with oven baked polymerized
white enamel (RAL9001).
Soft Start
The models YLHA PLUS 5, 7, 9 and 12 MCS have an electronic starter specially designed to limit the
starter intensity point in the single-phase Scroll compressors.
1
User manual
1.1 General description of the unit
4
To Next Page
Loading...
