York YMPA 0130 User Manual

FORM NO.:6U6K-B01E-NB-EN
JOHNSON CONTROLS
1
AIR-COOLED CHILLER
AND HEAT PUMP
Supersedes: 6U6K-B01E-NA-EN
FORM NO.: 6U6K-B01E-NB-EN
INSTALLATION,COMMISSIONING,
OPERATION & MAINTENANCE
R410A
Issue Date:
February 26, 2018
YMAA / YMPA 0045-0260
AIR-COOLED CHILLER AND HEAT PUMP
50Hz
44-255kW
Cooke Industries - Phone: +64 9 579 2185 Email: sales@cookeindustries.co.nz Web: www.cookeindustries.co.nz

York YMPA 0130 Specifications

General

Brand	York
Model	YMPA 0130
Category	Heat Pump
Language	English

Summary

Section 1 – General Information and Safety

Safety

Highlights safety standards, directives, and codes compliance for units.

Misuse of Equipment

Explains suitability for application, structural, mechanical, and electrical safety.

Section 4 – Installation

Wiring

Instructions for field wiring, power supply, and control connections.

Section 6 – Commissioning

Commissioning Procedures

Steps for authorized personnel to commission the unit.

Checking Superheat and Subcooling

Method for verifying refrigerant charge and system performance.

Unit Operating Sequence

Section 7 – Optiview LT Operation

Privilege Management

Fault

Information on fault display, readout, and reset procedures.

Section 10 – Service and Troubleshooting

Service Mode

User access to unit outputs, configuration, and input viewing.

Troubleshooting

Common problems, causes, and solutions for unit operation issues.

Section 11 – Maintenance

Compressors

Modbus Protocol

Fault Definitions

Comprehensive list of fault codes, descriptions, and classes.