3JOHNSON CONTROLS
FORM NO.: 6U6K-B01E-NB-EN
In complying with Johnson Controls’ policy for continuous
product improvement, the information contained in this
document is subject to change without notice. Johnson Controls
makes no commitment to update or provide current information
automatically to the manual or product owner. Updated manuals,
if applicable, can be obtained by contacting the nearest Johnson
Controls Service office or accessing the Johnson Controls
website.
It is the responsibility of rigging, lifting, and operating/ service
personnel to verify the applicability of these documents to the
equipment. If there is any question
This manual contains installation, operation and maintenance
instructions for both single and dual refrigerant circuit models.
If your unit is a single circuit model
CHANGEABILITY OF THIS DOCUMENT
ASSOCIATED LITERATURE
SINGLE CIRCUIT AND DUAL CIRCUIT MODELS
regarding the applicability of these documents, rigging,
lifting, and operating/service personnel should verify whether
the equipment has been modified and if current literature is
available from the owner of the equipment prior to performing
any work on the chiller.
CHANGE BARS
Revisions made to this document are indicated with a line along
the left or right hand column in the area the revision was made.
These revisions are to technical information and any other
changes in spelling, grammar or formatting are not included.
MANUAL DESCRIPTION
SC-EQ Communication Card Installation Instructions
FORM NUMBER
450.50-N1
(YMAA/YMPA 0045-0065), disregard references to “System
2” which may appear in this manual. Any references to Sys 2
are applicable to YMAA/YMPA 0080-0260 models.
Cooke Industries - Phone: +64 9 579 2185 Email: sales@cookeindustries.co.nz Web: www.cookeindustries.co.nz
To Next Page
Loading...
