FORM NO.:6U6K-B01E-NB-EN
JOHNSON CONTROLS
64
SECTION 5 – TECHNICAL DATA
Wire Controller DIP Switch
The 6-digit switch used to set the unit type is positioned in the
back of the wire controller. The DIPs are preset in accordance
with Microboard before delivery.
FIGURE 35 - WIRE CONTROLLER DIP SWITCH
The other digits of SW302, except for SW302-1, are used to set
the configurations of the unit. This is already finished before
unit delivery.
TABLE 23 - CONFIGURATION SETTING
DIP
SW302-1
SW302-2
SW302-5
SW302-6
SW302-7
SW302-8
OFF
NORMAL
COOLING ONLY
CE
INVERTER COMP.
WIRE CONTROLLER
ON
EC FAN
HEAL PUMP
FIXED COMP.
DEFAULT
OFF
ON
OFF
OFF
OFF
OFF
Cooke Industries - Phone: +64 9 579 2185 Email: sales@cookeindustries.co.nz Web: www.cookeindustries.co.nz
To Next Page
Loading...
