Youkey Q7 - Wi-Fi and USB Connection Methods; Image Mode Selection and Adjustment

27
3.3 Connection
3.3.1 Wifi Connection
After the machine starts, select the current scanner corresponding to the WiFi hot spot name, on
the end device click to connect.
3.3.2 USB Connection
Windows: Install the Windows driver in SonoiQ folder , Connect the straight USB-C to the
scanner USB-C port, connect the elbow USB-C to the Windows device and you will get images
immediately.
Android: Connect the straight USB-C to the scanner USB-C port, connect the elbow USB-C to
the Android device and you will get images immediately.
4 Detailed operation introduction
4.1 Image mode
mode
explain
【B】
Click to enter B mode.
【M】
Click to enter M mode.
【Color】
Click to enter Color mode.。
【Power】
Click to enter Power mode.
【PW】
Click to enter PW mode.
4.2 Image parameter adjustment
Before adjusting the image parameters to optimize the image, adjust the brightness of the display so
that it works best.
purpose
Optional operation
Changing image brightness
Adjust gain