16
Parameter Reset Defaults
Temperature Units
o
C
Dissolved Oxygen Units mg/L and %
Pressure Units mmHg
Dissolved Oxygen Sensor Type Last Setting Confirmed
Membrane Type Last Setting Confirmed
Salinity Compensation Value 0.0 ppt
DO Local% Off
One Touch Cal On
Display Contrast Set to mid range
Auto Shutoff 30 minutes
Auto Stable Off (0.0 % Change and 10 secs)
LDS (Last Digit Suppression) Off
Audio On
Language English
Dissolved Oxygen Calibration Reset to factory default, 100% for
enabled membrane and sensor*
Barometer Calibration Reset to factory default*
*It is recommended to perform a barometer and dissolved oxygen
calibration after performing a reset.
EXITING THE SYSTEM SETUP MENU
To exit the System Setup menu, press the down arrow key until the
ESC - Exit box is highlighted, then press enter
to return to the run
screen.
To Next Page
Loading...
