Basic display status :
When power on, the upper display window of the instrument shows the process value (PV), and the
lower window shows the set point (SV). This status is called basic display status. Symbol
description was shown as following table:
Note 1: The alarm message can turn off by setting parameter AdIS to oFF.
Note 2: When occur orAL alarm, instrument will cut the output in short period.
Note 3: For AI-516P,
“
StoP
”
,
”
HoLd
”
and
“
rdy
”
which mean the status in stop, hold and ready.
To Next Page
Loading...