Yudian AI-516 - Control and Output Specifications; Physical Dimensions; 1.5 Rear Terminal Layout and Wiring; Wiring Graph Overview

9
 Control period : 0.24
～
300.0 seconds selectable, and it should be integer times of 0.5 second.
 Control mode:
On-off control mode (dead band adjustable)
Standard PID with auto tuning
AI PID with auto tuning, adopting artificial intelligence algorithm.
 Output mode (modularized)
Relay output (NO+NC): 250VAC/2A, 30VDC/2A, 250VAC/1A and 30VDC/1A
TRIAC no contact discrete output (NO or NC): 100
～
240VAC/0.2A (continuous), 2A (20mS
instantaneous, repeat period
≥
5s)
SSR Voltage output: 12VDC/30mA (used to drive SSR).
Thyristor zero crossing trigger output: Can trigger TRIAC of 5
～
500A, a pair of inverse
paralleled SCRs or SCR power module.
Linear current output: 0
～
20mA, 4
～
20mA can scaling by user. (Output voltage : X3
≥
10.5V; X5
≥
7V maximum load resistor 500ohm, output precision 0.2%FS)
 Electromagnetic compatibility (EMC):
±
4KV/5KHz according to IEC61000-4-4; 4KV
according toIEC61000-4-5.
 Isolation withstanding voltage : Between power, relay contact or signal terminals
≥
2300VDC; between isolated electroweak terminals
≥
600V
 Power supply : 100
～
240VAC, -15%, +10% / 50-60Hz; 120
～
240VDC; or 24VDC/AC, -15%,
+10%.
 Power consumption:
≤
5W
 Operating Ambient : Temperature -10
～
60
℃
; humidity
≤
90%RH
 Front panel dimension: 96
×
96mm, 160
×
80mm, 80
×
160mm, 48
×
96mm, 96
×
48mm, 48
×
48mm, 72
×
72mm
 Panel cutout dimension: 92
×
92mm, 152
×
76mm, 76
×
152mm, 45
×
92mm, 92
×
45mm, 45
×
45mm, 68
×
68mm
 Depth behind mounting surface:
≤
100mm
1.5 Rear Terminal Layout and Wiring
Wiring graph of A B C E F dimension instruments