difference between different versions when using the instrument. Please read this manual carefully in order to
use the instrument correctly and make it to its full use.
● Please correctly set parameters according to input / output type and function. Only correctly wired instruments
with parameters correctly set can be put into use.
1.2 Ordering Code Definition
Advanced modularized hardware design is utilized for AI series instruments. There are maximum five module slots:
multi-function input/output (MIO), main output (OUTP), alarm (ALM), auxiliary output (AUX) and communication
(COMM). The modules can be purchased together with or separately from the instrument, and can be assembled
freely. The input type can be freely set to thermocouple, RTD, or linear current/voltage.
The ordering code o f A I -518 series instrument is made up of 9 p a r t s . For example:
AI -518 A (F2) N X3 L5 N S4 — 24VDC
① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨
It shows that the model of this instrument is AI-518, front panel dimension is 96×96mm, an extended input type (F2
radiation type pyrometer) is available, no module is installed in MIO (Multi-function I/O) slot, X3 linear current output
module is installed in OUTP (main output), A L M (alarm) is L5 (dual relay contact output module), no module is
installed in AUX (auxiliary output), a RS485 communication interface with photoelectric isolation is installed, and the
To Next Page
Loading...
Need help?
General
