power supply of the instrument is 24VDC.
The following is the meanings of the 9 parts:
① Shows the model of the instrument
AI -518 economical type instrument wi t h measurement accuracy 0.3%F.S. It adopts artificial intelligent control
technology, and has the functions of control, alarm, retransmission and communication.
② shows the front panel dimension.
A( A2) front panel 96×96mm(width×height), cut out 92×92mm, depth behind mounting surface 100mm. A2
has a light bar with 25 segments and 4 levels of luminosity.
B front panel 160×80mm(width×height), cut out 152×76mm, depth behind mounting surface 100mm.
C(C3) front panel 80×160m m( wi dt h ×height), cut out 76×152mm, depth behind mounting surface 100mm.
C3 has an additional light bar with 50 segments and 2 levels of luminosity .
D front panel 72×72mm(width×height), cut out 68×68mm, depth behind mounting surface 95mm
D2 front panel 48×48mm(width×height), cut out 45×45mm, depth behind mounting surface 95mm`
E front panel 48×96mm(width×height), cut out 45×92mm, depth behind mounting surface 100mm
F front panel 96×48mm(width×height), cut out 92×45mm, depth behind mounting surface 100mm
③ shows the optional extended graduation spec (If none, leave it blank). A I-518 series instruments
support many input types including popular thermocouples, RTDs, linear voltage, current and resistance
inputs. If needed, an additional specification not mentioned in input type selection (InP) table can be
extended.
To Next Page
Loading...
Need help?
General
